YUJI LED PHOSPHOR MATERIALS
Home / Products / LED Phosphors / ZYP550SG2
ZYP550SG2 - YAG yellow phosphor for LEDs
The yellow phosphor ZYP550SG2 is a special product for white LEDs independently developed by our company (patent has been approved). In comparison with other similar products in market, it is best applied to the manufacture of white LED package products, owing to its high brightness, high thermal stability, excellent safety and environmental protection, and also its small medium particle diameter.
|Excitation Wavelength||450-460 nm|
|Primary Emission||551±1 nm|
|Dominant Emission||567±1 nm|
|Appearance:||Yellow crystal powder.|
|Component:||Rare earth garnet.|
|Stability:||No decomposability in water, strong stability from -50C to 300C in air.|
|Safety:||Meets RoHS standards, contains no radiation, no toxicity. Poses no hazard to humans or the environment.|
|Usage:|| Can be applied to packaging highly bright 8000-9000K (CCT) white LEDs with blue chips.|
Can be used to manufacture 2700-4500K (CCT) warm white LEDs with red phosphors.
Can be used to manufacture high color rendering white LEDs with other phosphors.
|Directions:||Weigh the phosphor and epoxy or silicone in the correct concentration and mix them evenly. Pump in the vacuum chamber to eliminate air bubbles before package in LEDs for testing. Adjust the concentration as needed and repeat the above steps until the desired CIE is achieved (it can also be mixed with other phosphors).|
|Storage:||Keep products sealed in packaging and store in a clean and dry environment. Avoid long term exposure to air.|