High CRI LED Track Light
As directional lighting product, track lights are featured the ability to move along the track, and the adjustable irradiation angle. Generally speaking, track lights are used in Commercial application, such as shopping malls (clothing stores, furniture stores and other brand stores), car show, jewelry exhibition, star hotel, high-end clubs, museums and galleries, showcase and other accent lighting places.
With the continuous advances in LED lighting technology, track lights on the market of halogen and metal halide light sources are gradually being replaced by LED light sources. The disadvantage of the conventional halogen track light is high heat, low light efficiency, and short life time. The light-emitting principle of metal halide is the reaction of gasified heavy metals mercury and two electrodes to produce light, although with higher luminous efficiency, energy consumption is also high, and start slow. Besides, noise, flicker and heavy radiation are also some serious shortcomings. Once broken, these lamps must be handled carefully, otherwise they may cause pollution (mercury is a heavy metal elements that harmful to human health). However, the characteristics of LED lighting make up for these deficiencies. LED track light with cold light source has no radiation, no heavy metal pollution, pure color, high luminous efficiency and low flicker. Therefore, it is an inevitable trend of widely using LED track lights.
Contrast of LED track lights, halogen lamps and metal halide
Life time 2,000 hours, heat radiation light source, low lumen efficacy
Life time 20,000 hours, heavy heat radiation, start slow, with flicker and noise
LED track light
Life time 50,000 hours, cold light source, without flicker, environmental friendly and energy saving
LED track light must be installed on the matched track which comprises a conductive metal strip inside the track (made of high-quality copper, made of iron poor). There is a rotatable conductive copper tablets at the connector of the track light rotatable, by which the internal conductive metal strips can be connected to achieved powered circuit and light up the track light. Usually, there are tracks with two wire, three wire and four wire. Track length specifications are usually 1.0m, 1.5m, 2.0m. Two wire are common in China and Southeast Asia, while three wires and four wire are more popular in Europe.
The following is a new utility-type LED track lights comprising LED PAR light and the housingfixture which contains matched E27 joint (i.e. ordinary screw fittings). This track light is characterized by easily renewable light source. And people can directly replace traditional halogen with LED PAR lamps.
Below is a common integrated LED track lights which consists of aluminum housing for cooling,energy saving reflecting cup and PC cover. They are characterized in that the PCB circuit board and driver section are included in the housing bottom. The small bottom box volume makes thetrack lights installation more easier than the original lamps.
Beijing Yuji High CRI LED track light is different from the above two in appearance, but a combination of track lights and floodlights appearance characteristics. The whole lamp power is48W. This light can provide high performance light quality with CRI 95+ using 135 pieces high CRI SMD 5630 LEDs. The rectangle light emitting surface can give out very uniform light output with emitting angle 60 to 120 degrees. This special design of high-power and high-emitting angle are more suitable for large objects in non-accent lighting, such as museum, large art exhibitions, trade shows and other large items exhibition lighting. The color temperature of 3200K, 4000Kand 5600K are available for different situation. With CRI up 95-98 and 2400lm output, it can provide very high-quality light for the indoor lighting to meet customer requirements for light color and brightness very well.